perfect levelling
compact format
perfect levelling
compact format
One step ahead in levelling
The new Compact Clip offers all the new functionalities of the LS Classic in a more reduced format.
The new wide wedge guarantees the same tightening force and has a graded thickness in the head, so it can be used as a wedge after it is removed, ensuring a new sustainability level.
Available in 5 sizes to get the fit you need
0,5 mm Clip
1 mm Clip
1,5 mm Clip
2 mm Clip
3 mm Clip
5 mm Clip
LS Compact Wedges
compact wedge
Transparent Wedge
You'll see it all from a different angle
The patented pre-cutting on the base continues ensuring that removal is easy, and this, together with the more compact appearance, further facilitate that step.
This angular wedge is a design developed by our R+D department that distributes the force very well.
Made of 100% high quality polyamide.
Angled wedge design
Reusable clip as a separator.
LS Compact, the new levelling system from PEYGRAN.
This is a wide wedge system, but not just any ordinary system since it introduces two remarkably important innovations. Firstly, the wedge surface is angled to offer a greater and more effective grip with the clip and, in addition, it creates a smaller opening in the joint.
Secondly, the clip top can be reused as a tiling wedge or spacer, a perfect option to reduce the waste generated when installing tiles.
Mode of use
1. Adjust the pliers
Adjust the pliers to the scale required by the ceramics thickness.
2. Place the clips
Spread the glue cement and then lay and level the first tile, then set with the mallet. Insert the clip at the ends of the tile (approx. > 50 mm from the edge).
3. Insert the wedges
When laying the adjacent tiles, insert the wedges in the clips manually.
4. Tighten
Rest the pliers as shown in the image and tighten to the maximum to level the tiles before the glue sets.
.
5. Tap gently with the mallet
When the tile is levelled, tapping gently with the mallet is recommended to release tensions.
6. Allow for setting
When the surface is finished, allow the glue to set for the time recommended by the manufacturer.
7. Remove the system
After the necessary time has elapsed, remove the clips by hitting them with a rubber mallet or with your foot in the direction of the joint (do not hit the wedges). The clip will always break by the side cuts, under the ceramic.
8. Reusable wedges
Finally, recover the wedges, dispose of the rest of the clip and grout the tiles.
- 1. Indicate the length A and width B of the tiling in metres (M)
- 2. Indicate the tile format C and D in centimetres (cm)
- 3. Indicate the maximum length of the tile between supports.
- 4. Indicate whether central Pedestal is required or not.
Step 1: Terrace
A
Length (M)
B
Width (M)
Sup.
M²
M
M
87.00
M
Step 2: Tile
C
Length (CM)
D
Length (CM)
CM
CM
Step 3/4: Pedestals parameter
Maximum length between plots [cm]
Central plot [sí / no]
Joint [mm]
CM
TOTAL CLIPS
Ratio
u/M²
536.00
uds
6.2
- 1. Indicate the length A and width B of the tiling in metres.
- 2. Indicate the tile format C and D in centimetres (cm).
- 3. Indicate the spacing between joists X, and the distance between supports Y. Both multiple of the tile.
Step 1: Terrace
A
Parallel to joist (M)
B
Perpendicular to joist (M)
Sup.
M²
M
M
100,00
M
Step 2: Tile
C
Length (CM)
D
Width (CM)
E
Joint (MM)
M
M
4
MM
Step 3: INTER-AXIS
X
Inter-axis joist (MM)
Y
Pedestals spacing (MM)
MM
MM
Plots
2m Joist
Ref. 03040141Z
Joist Clip
Ref. 03040132E - 100u.
Slab joist spacer
Ref. 03040131E - 100u.
324
uds
100
uds
13
bags
4
bags
1296
bags
324
bags
1
Create Perimeter
2
Watercourse
3
Tile Type
4
Final result